Motul Factory Line 800 2T Road-Race Oil – 1L

Road-racing lubricant at its finest:

That’s how they’ve come to develop this Factory Line 800 Road-Race Oil. By selecting esters over other high performance synthetic base stocks and then combining them with an innovative additive package, Motul have created the perfect synergy. This most advanced technology allows maximum power output of the engine without compromising reliability and wear.

Goes above and beyond: Your engine and exhaust power valves are always well lubricated and your piston rings are prevented from sticking. You know that this is an oil worth investing in when it’s well above all current standards!

MX rider instead of an Road racer? If you’re an MX rider your engine would be more suited to using the Motul 800 2T Off-Road Oil as it has been slightly modified to operate under extreme and demanding riding conditions.

PLEASE NOTE: We are unable to ship aerosols and liquids outside of the UK. Please do not purchase if you are located outside of UK, your order will be cancelled.

Motul Factory Line 800 2T Road-Race Oil Manufacturer Spec

• Formula developed for Road Racing Grand Prix Teams
• Suitable for all kind of petrol up to 124 octane
• All racing premix 2 stroke engines fitted on Racing bikes & operating at high revs & under high load
• For moto-cross, use MOTUL 800 2T OFF ROAD
• For oil injector systems, use MOTUL 710 2T
• This most advanced EsterCore Technology allows maximum power output of the engine without compromising reliability & wear
• Allow a perfect lubrication when running on wet weather conditions
• Very high lubricating properties which decrease friction & wear
• Keeps engines & exhaust power valves clean & well lubricated
• Prevents piston rings & exhaust power valves from sticking

Recommendations:
• Mixing ratio: ROAD RACING GRAND PRIX from 3% to 4% (from 33:1 to 25:1)
• In normal conditions decrease the percentage by 0.5%
• Adjust according to your own useStandards:
• Above all standardsProperties:
• Colour: Visual: Orange
• Density at 20C (68F): ASTM D1298: 0.927
• Viscosity at 40C (104F): ASTM D445: 157.4 mm²/s
• Viscosity at 100C (212F): ASTM D445: 19.2 mm²/s
• Viscosity index: ASTM D2270: 140
• Flash point: ASTM D92: 274C / 525FPLEASE NOTE: We are unable to ship aerosols & liquids outside of the UK. Please do not purchase if you are located outside of UK, your order will be cancelled.